This file simulates a single Microstrip Patch Antenna at 10GHz in ANSYS HFSS. The patch is fed by a 50Ω coaxial cable via an SMA connector. The substrate which the patch lies is Rogers 5880 with the thickness of 30mil.
The polarization of the antenna is linear.
This file simulates a single Microstrip Patch Antenna at 10GHz in ANSYS HFSS. The patch is fed by a 50Ω coaxial cable via an SMA connector. The substrate which the patch lies is Rogers 5880 with the thickness of 30mil.
The polarization of the antenna is linear.
If you have any questions about the simulation file or need a custom design, please fill the following form and request your need.
22€
0 Purchase
0 Comments- Created October 11, 2020
- Simulation Software ANSYS Electronics Suite - HFSS
- Software version 2020 R2
- Antenna Input Coax (SMA Connector)
- Substrate RT/duroid 5880
- Center Frequency 10GHz
- -10dB Return Loss Bandwidth 420MHz
- Polarization Linear
- Realized Gain 8.29dBi @10GHz
- Beamwidth 71.3deg (E-Plane), 73.5deg (H-Plane)
- Tags ANSYS HFSS anten Antenna Coax Design Microstrip Patch Simulation SMA آنتن تصميم شبیه سازی طراحی کواکسیال مایکرواستریپ محاكاة ميكروستريب هوائي
Related Items
Take up the challenge!
Brilliant, you have chosen not to reinvent the wheel. Download rfsims products and and save your time.